Skip to content

Thermal Paste 12.8 W: 2 g Syringe for Bitaxe, NerdAxe and NerdQAxe

€4.99

Incl. VAT, plus shipping.

€4.74 with Bitcoin (5% off at checkout)

In stock

  • In-stock orders placed before 14:00 on a working day leave the same day.
  • Tracked shipping from the EU, no customs inside the EU
  • You can withdraw from your purchase within 14 days: how returns work.
  • We reply within one working day. Contact us
  • Payment methods:BitcoinLightningVisaMastercardPayPalBank transfer
  • A 2 g syringe of thermal paste for every cooler swap
  • 12.8 W/(m·K) thermal conductivity according to the manufacturer
  • Not electrically conductive and rated from −20 to 240 °C, according to the manufacturer
  • For Bitaxe, NerdAxe and NerdQAxe, from single-chip to multi-chip boards

Fresh paste for the moment the cooler comes off: a 2 g syringe for Bitaxe, NerdAxe and NerdQAxe

What is in the box

  • Syringe with 2 g of thermal paste, in a bag

A thin layer that decides how well the cooler works.

Between the ASIC and the heatsink sits a thin layer of thermal paste. It fills the tiny unevenness of both surfaces, where there would otherwise be air, and air carries heat badly. Whenever a cooler comes off, the old paste goes and fresh paste goes on: when you fit an AirBlock 40, when you clean a miner, or when the chip runs clearly warmer than it used to at the same clock and with a clean fan.

What the manufacturer states

  • Thermal conductivity: 12.8 W/(m·K)
  • Temperature range: −20 to 240 °C
  • Not electrically conductive

We have not measured these values ourselves, and conductivity figures are hard to compare between brands because each one measures differently. On a home miner, a thin layer without gaps matters more than the last decimal.

Applying it

You need a little isopropyl alcohol and a lint-free cloth.

  1. Unplug the miner and take the cooler off.
  2. Wipe the old paste off the chip and the cooler base until both surfaces are clean and dry.
  3. Put a small dot of paste in the middle of the chip. On boards with several chips, such as the NerdQAxe++, every chip gets its own dot.
  4. Seat the cooler straight and fix it; the pressure spreads the paste.
  5. Wipe away anything that ends up next to the chip, close the syringe and keep it clean and cool.

More paste does not help, it only makes the layer thicker. After the first start, check the chip temperature in your miner’s dashboard. Our Bitaxe setup guide and NerdAxe setup guide show where to find it.

Which miners it is for

Any miner with a heatsink on the chip: the Bitaxe Gamma, the NerdAxe Gaia, the NerdQAxe++ and the NerdOctaxe. The AXP90 Copper Pro comes with its own paste; for a later remount, this syringe is the spare.

Customer reviews

There are no reviews yet. After delivery every buyer gets a personal link to review the order.

Guides for this product